Damp Shield

Berger

Exterior primer

Damp Shield

Damp Blocking Exterior Primer

A water-based damp blocking exterior primer formulated with special grade pigment and micro fibres that provides extra whiteness and opacity. It forms a tough film on the surface of the masonry, as a result provides longer life to the paint system and better top coat application.

  • Stronger walls
  • Dryer homes
  • Longer life

Better top coat coverage

Helps the finish coat spread evenly with strong hiding.

Low VOC

Water-based formula for a cleaner application.

Exterior waterproofing warranty

3 years* waterproofing performance warranty.

High whiteness

Bright white base for cleaner, truer topcoat colour.

Protects the topcoat

Shields the finish from damp-related damage.

Stability of thinned paint

Use within 24 hours after thinning.

Shelf life

2 years from the date of manufacturing.

Product Description

Home Shield Damp Shield is a water-based damp blocking exterior primer, formulated with special grade pigment and micro fibers that provides extra whiteness and opacity. It forms a tough film on the surface of the masonry, as a result provides longer life to the paint system and better top coat application.

Coverage 110–120 sq.ft./L · 2 coats*
Drying time Surface dry 15 min · Hard dry 6–8 hrs*
Finish Matt
Flash point Non-flammable
Application Spray / brush / roller
Dilution Brush: up to 1:1 with water
Berger Damp Shield available packs: 1 Ltr, 4 Ltr, 10 Ltr, 20 Ltr

Surface Preparation

Preparing exterior masonry before priming
  • Remove dirt, chalk, grease, fungus and loose particles from the surface.
  • Fill cracks and dents; allow putty or cement repairs to dry fully.
  • Ensure masonry moisture content is below 12% before priming.

Directions for Application

Applying Damp Shield exterior primer
  • Dilute as recommended, strain the primer, then apply one full coat.
  • Allow proper drying before the finish coat.
  • Apply a second primer coat only if the surface needs extra sealing.

Special Note & Safety

Special note

  • Check moisture content stays below 12%.
  • Ideal surface pH value is between 7 and 11.

Points to note

  • Shake well before use.
  • Do not over-dilute.
  • Strain before application.
  • Keep the container tightly closed after use.
  • Keep out of reach of children.
  • If product contacts eyes, rinse and seek medical help.

Refer to the product MSDS for full safety data.

Stronger walls start here

Ask VTJ HOMEDECOR about Berger Home Shield Damp Shield for damp-prone exteriors.

Find a Dealer